...

3.5g Mylar Bag- Opaque White (128 Qty)

$21.00

Out of Stock

Out of stock

SKU: C420-35OW Categories: ,

Orders placed by 2pm EST ship the same day

100% Satisfaction Guaranteed

If you are not satisfied get a full refund

Secure Checkout Transactions

All transactions are fully encrypted

Discreet and Fast Shipping

Packages are shipped UPS Ground in unmarked boxes

This page concerns the Custom 420 Supply 3.5g opaque-white Mylar bag listing, SKU C420-35OW. It is a package component intended for businesses that need a light-blocking pouch format and a clean white surface for a retail product label. The live listing describes a 128-count pack, a 3.43-by-5.04-inch bag, a bottom gusset, a tear notch, a heat-sealable top and a proprietary child-resistant zipper. Verify pricing, stock, material availability and the current product specification before ordering; those commercial details can change. A bag's listed features do not establish regulatory approval for every cannabis product or state.

What is included in the listed product?

The current product title identifies a pack containing 128 opaque-white bags sized for a nominal 3.5g use case. The listing describes a matte white front and white back, plus a Se-Cure child-resistant zipper, tear notch and heat-seal capability. These are seller-provided product attributes. Actual usable fill volume depends on the density and shape of the product, not merely its weight. Confirm the internal dimensions and usable fill capacity with a sample. Do not assume that 3.5 grams of flower, 3.5 grams of a dense edible and a bulky concentrate container will fit in the same way.

Check the pouch dimensions before bulk purchase

The product listing gives dimensions of approximately 3.43 by 5.04 inches, but buyers should confirm whether those figures describe the outside package and what space remains below the zipper and seal. The bottom gusset, a folded panel that opens out when the bag is filled, is what allows the pouch to stand upright on a store shelf, and it changes the usable volume and how the bag behaves when filled. Build a packaging mockup using the actual intended contents, then test whether the bag closes comfortably without stretching the zipper. Leave a free area for heat-seal equipment and mandatory labels. A standard dimension is useful for shortlisting products; it is not a substitute for a filled-product test.

Understand the zipper, seal and tear notch

This bag combines a resealable child-resistant zipper for consumer use, an open top for heat-sealing after filling, and a tear notch. The three mechanisms serve different purposes: the zipper supports repeated access and freshness, the heat seal across the top provides tamper evidence when properly formed, and the tear notch helps the user open the sealed portion. These functions should not be conflated. The listing describes a proprietary Se-Cure child-resistant zipper; request the child-resistance certification or test documentation for this exact SKU, because verified child resistance is a critical requirement for dispensaries in many states. Request supporting closure evidence for the exact SKU, and confirm whether the configuration satisfies the child-resistance rule applicable to your product and state. If the pack is intended for repeated openings, test it after multiple real-world cycles. The filling team should document seal temperature, pressure, dwell time and any other settings specified by the supplier rather than improvising at production scale.

An opaque surface can support clear labeling

Opaque-white film provides a visually simple base for product stickers or custom labels. This listing has a matte white front and white back; other base finishes, such as gloss white or fully custom-printed bags, are available as separate products. A finish does not make text readable automatically, so understand the customization options and limits of the finish you choose. Use a strong contrast between ink and film; reserve space for warnings, product identity, licensed business information, tested cannabinoid values and batch data as required. Verify that a label adheres to the specific film and finish after handling and storage. Avoid covering the zipper instructions or tear notch. In jurisdictions requiring an official universal cannabis symbol, use the current state graphic rather than an approximation created by a designer.

Barrier properties should be verified, not assumed

The seller identifies the material as a metallized polyethylene construction, a laminate in which a metallized barrier layer sits behind the outer film. Ask the supplier to confirm the film thickness, usually quoted in mil, because thickness affects puncture resistance and how the bag handles in retail. That description alone does not specify exact oxygen or moisture transmission performance for the completed pouch, nor does it justify a numerical shelf-life claim. Ask for a technical data sheet when barrier performance matters. Pay attention to seal quality, pinholes, zipper integrity and the effect of repeated opening. A closed film may resist light and transfer differently from a finished package after filling. For aromatic products, evaluate odor containment over time rather than advertising the pouch as permanently smell-proof.

For aromatic products, evaluate over time whether the filled, sealed bag stays smell-resistant, airtight and moisture-resistant. The opaque material is inherently light-blocking, which helps protect contents from light exposure, but verify the other protective claims with samples rather than advertising the pouch as permanently smell-proof without testing.

Use the right product and state review

Cannabis packaging rules differ substantially across the country. Some programs require opaque retail packaging; others allow different visual formats. Child resistance, tamper evidence, resealing and labeling can also vary by product form. The bag should be reviewed as part of the complete finished packaging system, including stickers, outer boxes and any required exit bag. A vendor's description cannot automatically certify the licensed operator's finished product. Keep test records, product specifications and an approved artwork revision with the purchase order so a repeat order uses the same validated configuration.

Questions to ask before placing an order

Request a sample or technical specification, verify the SKU and 128-count quantity, confirm the finish and actual dimensions, and ask which child-resistant evidence covers this exact design. If you expect to scale up, ask about pricing tiers and availability for larger quantities. Explain your fill product and whether it will be single-use or reopened. Confirm label application and heat-seal compatibility with your machinery. If your order must meet a state packaging approval process, leave time for that approval before scheduling a launch. Keep a record of agreed specifications instead of relying solely on a web screenshot.

Where this bag fits in a larger packaging system

A plain white pouch can serve as a baseline package when a brand uses printed labels, small variations by product batch or a limited number of SKUs. It may not be the best choice when the product needs a wider base, complex multi-panel warnings or a large window. For those applications, compare alternative pouch sizes and fully printed options. Focus on fit, safe use and labeling space before appearance. A package should make routine fulfillment predictable, not create additional handling steps to force an unsuitable SKU into service.

Final thoughts

Treat this listing as a component specification, not a finished-product compliance certificate. Order the right material, confirm that the bag remains opaque and functional when filled, and release the final print only after documented product and regulatory checks.

Need a printed version instead? Explore our custom Mylar bags or contact our team for samples and a quote.

Frequently Asked Questions

Is the price or inventory status guaranteed?

No. Check the live product listing or request a quote at purchase time. Prices and stock status are not fixed product specifications.

What is the listed quantity for SKU C420-35OW?

The current product name identifies 128 bags per order unit. Confirm the invoice unit and SKU before checkout.

Is this package automatically compliant in every state?

No. A licensed business must verify the specific finished package and its labels against relevant state requirements.

Can the bag be heat sealed?

The seller describes it as heat-sealable, but actual sealing parameters and compatibility should be confirmed with the supplier and tested on your production equipment.

Additional information

Weight 2 lbs
Dimensions 9 × 8 × 1 in
Color

White/Clear

Size

3.5G

Material

Metallized polyethelyne

Dimensions

3.43” x 5.04”

Style

Features

, , ,

Use With

, ,